Machine type: The central large roller type, the substrate is supported by a single large roller, and does not leave the pressure roller between one color and one color, so the color registration is correct.
Note: Standard machine is with single winder.
This picture is with double winder, it just an approximate look.
because Different requirements there maybe little differences in the picture and in-kind .
Characteristic:
(1)Machine type: The central large roller type, the substrate is supported by a single large roller, and does not leave the pressure roller between one color and one color, so the color registration is correct.
(2)Mechanical structure: The parts are interchangeable, the parts are easy to obtain, and the wear is low.
(3)Drying method: Separate electric heating box, which can be used for safe and temperature control.
(4)Ink knife method: development type scraper, easy to install without tools.
(5)Transmission system: Hardened high-precision geared motor with multiple buttons for easy operation.
(6)Receiving transmission: Miniature geared motor, driving magnetic powder clutch, with PLC control tension stability.
(7)Plate roll specification: repeat length is 5MM
Main Parameter:
|
Model |
KDCI6-600A |
|
Color |
6 color |
|
Max. Web Width |
650mm |
|
Max. Printing Width |
600mm |
|
Printing Material |
BOPP,PET,PE, NY. Etc. |
|
Max .Machine Speed |
150m/min |
|
Max. Printing Speed |
120m/min |
|
Max. Unwind/rewind Dia. |
Ф800mm |
|
Printing repeat |
350-800mm |
|
Gearingofprinting cylinder |
5mm (Each Increase/decrease 1 tooth, the repeat length increase/decrease 5mm |
|
Printing way |
Full width 6 color on one side |
|
Printing plate thickness |
Photopolymer plate 1.7mm or 2.28mm (As customer requirement ) |
|
Printing cylinder |
Within 40cm 6 pcs |
|
Ceramic Anilox roller |
650LPI ,600LPI , 400LPI (as customer’s requirement ) |
|
Dimension |
7500*2050*3200 mm |
|
Weight |
8T |
Detail Configuration:
1.Single Central Unwinder
2.Tension control :
Adopt Light float roller . tensionauto compensation, close-loop control
3. Air shaft loading material
4. EPC (edge position control): Set and run four roll type automatically EPC ultrasonic detector system; With manually/automatically/ central return function, can adjust left and right around ±65mm width.
Printing Unit:
1.Type : CI Flex Printing Machine
2.Color: 6 Color
3.Drive mode: Mechanical drive
4.Drive motor : AC geared motor
5.Printing way :
1) Plate -Photo polymer plate
2) Ink--water base or solvent ink
6.Printing Repeat: 350-800mm
7.Big Central Drum:
1) Ф1000mm 2)Made in China
8.Feeding Traction Roller : Rubber pressure roller ,Pneumatic type
control opening and closing
9.Printing cylinder: Within 40cm 6pcs for free
10.Ceramic anilox roller :
1）The precision of dynamic balancing: 10g
2）Automatic mixing the ink when halt machine,
13.Doctor blade :Chamber blade6pcs
Components List:
|
|
Brand |
|
Human-computer Interface |
China |
|
PLC programming controller |
Taiwan |
|
Relay |
Schneider. France |
|
Contactor、Button、Potentiometer |
Schneider. France |
|
Breaker |
France |
|
Temperature controller |
Schneider. France |
|
Inverter |
Delta brand Taiwan |
|
Auto EPC |
China |
|
Bearing for anilox roller, printing roller, Central drum |
Japan |
Добро пожаловать на наш сайт! Отправьте нам подробный запрос, и мы ответим вам в ближайшее время.
