Three layers film blowing machine

Three layers LDPE HDPE EVA film blowing machine,use polyethylene High-density polyethylene HDPE, Low density polyethylene (LDPE),EVA to produce function film,suit for general packaging products such as hot shrink film,pack film,water bag and other products.

Feature:

1. HDPE,LDPE, LLDPE virgin raw material, recycled material,CaCO3 compound,biodegradable material, masterbatch and additives materia

2. inveter control film extruder speed,save power,ECO and save cost.

3. Film thickness 0.01mm-0.1mm

4. Film width 100mm-1200mm

5. Film suit for plastic glove,vegetable bag,T-shirt bag,trash bag,flat bag,cloth bag and for package.

6. Screw material is 38CrMoAl,can use long time

7. Warrant is one year,machine can running nonstop,24 hours a day, 7 days a week

8. Machine with simple design,easy operate

9. Machine is economic design,suit for new beginer or starters

10. Machine power 220V,380V,440V,480V(Customized based on request,For example: USA 480V 60Hz, Mexico 440V/220V 60Hz, Saudi Arabia 380V 60Hz, Nigeria 415V 50Hz...)

11. Afford after sale service,can send engineer to buyer factory,to install machine and afford training service.

12. We are welcomed customers Customized machines or OEM design.

The case during film blowing：

1. If the equipment is not heated, the heating temperature and time are not up to the stipulated requirements, the extruder and the rotating die shall not be started, otherwise the equipment will be damaged.

2. When unpacking raw materials, it is necessary to check whether there is wet material. The wet material should not be mixed. It must be dried in the drying room before it can be used. A kind of

3. When cleaning the die head and die, only copper sheet can be used to clean the die mouth, and no spade or iron sheet can be used to scrape the die mouth, otherwise the die mouth will be damaged.

4. The guide rollers of film blower, including rubber rollers and winding rollers, should not be cut with blades, otherwise the guide rollers will be scratched.

Optional Equipments:

1)Auto Loader 
2)Air Compressor 
3)Rotary Die Head     
4)Double Side Winder(Back to back winder)   
5)Up and Down

6)Embossing Cylinder

7)Air Shaft

8)Masterbatch Dosing device

9)Automatic Winder Changer

10) Corona treatment

Main Technical Variables:

※Correct specifications depend on the actual model. All specifications are subject to change without prior notice.

Install machines in Saudi Arabia.

If you buy one container machines,we will pack machine with stretch film and loading container directly (FCL full container load).

If you only buy one machine,we will pack machine with wooden pack,and loading container with Less Than Container Load（LCL）.

Our Main parts cooperator as following brand,but standard parts all made from China.

Extrusion Film Extrusion use Polyethelene,such as Low Density Polyethylene(LDPE),High Density Polyethylene(HDPE) and Linear Low Density Polyethylene(LLDPE),Polypropylene(PP). Below are big brand material supplier in the world,they open office all over the world,you can check them in local market.

1.Sabic Saudi Basic Industries Corporation

2.ExxonMobil Chemical Company     
3.Dow Chemical Company