Machine type: The central large roller type, the substrate is supported by a single large roller, and does not leave the pressure roller between one color and one color, so the color registration is correct.
Characteristic :
(1)Machine type: The central large roller type, the substrate is supported by a single large roller, and does not leave the pressure roller between one color and one color, so the color registration is correct.
(2)Mechanical structure: The parts are interchangeable, the parts are easy to obtain, and the wear is low.
(3)Drying method: Separate electric heating box, which can be used for safe and temperature control.
(4)Ink knife method: development type scraper, easy to install without tools.
(5)Transmission system: Hardened high-precision geared motor with multiple buttons for easy operation.
(6)Receiving transmission: Miniature geared motor, driving magnetic powder clutch, with PLC control tension stability.
(7)Plate roll specification: repeat length is 5MM
Main Parameter:
|
Model |
KDCI4-800A |
|
Color |
4 color |
|
Max. Web Width |
850mm |
|
Max. Printing Width |
800mm |
|
Printing Material |
BOPP,PET,PE, NY. Etc. |
|
Max .Machine Speed |
150m/min |
|
Max. Printing Speed |
120m/min |
|
Max. Unwind/rewind Dia. |
Ф800mm |
|
Printing repeat |
350-800mm |
|
Gearingofprinting cylinder |
5mm (Each Increase/decrease 1 tooth, the repeat length increase/decrease 5mm |
|
Printing way |
Full width 6 color on one side |
|
Printing plate thickness |
Photo polymer plate 1.7mm or 2.28mm (As customer requirement ) |
|
Printing cylinder |
Within 40cm 4pcs |
|
Ceramic Anilox roller |
650LPI ,600LPI , 400LPI (as customer’s requirement ) |
¡Bienvenido a nuestro sitio web! No dude en enviarnos su consulta en detalle, le responderemos lo antes posible.
